Turbo Kits
                                                                                                                               
!

Turbo Kit
From
!
dragparts
Drag High flow 4 into 1 cast iron turbo exhaust manifod
Turbonetics T04 / T3 turbocharger
Turbonetics Deltagate Mark II Wastegate (7 PSI Spring)
Spearco front mount intercooler w/ polished tanks
BLITZ dual drive Blow Off Valve
Drag mandrel bent high flow chrome plated intercooler pipes
Drag mandrel bent high flow exhaust down pipe
Drag wastegaste dump tube
Heavy Duty silicone hose and hose clamps
MSD High pressure / High volume inline fuel pump
Vortech 12:1 Boost dependent FMU fuel regulator
Intake air filter assembly
Map sensor bypass valves
Stainless steel braided oil feed line w/ fittings
Oil return assembly
All necessary hardware and fittings
All necessary hose and hose clamps
All necessary gaskets
Installation manual

Greddy Bolt-On Turbo Kits
Just
!
T88HTURBO
 
BOLT-ON TURBO KITS    

It takes a tremendous amount of money and time to successfully increase the power of a naturally aspirated engine. With a GReddy bolt-on turbocharger kit you can obtain instant horsepower gains with less time and money while still having the potential for upgrading. Unlike most turbo kits on the market today, GReddy kits are designed specifically for driveability and reliability, as well as performance. Since they are based completely on stock engines, these kits come with all the necessary basics, including fuel enrichment. Many of the kits are covered under CARB E.O. numbers which make them 50-state street legal. If competition use is your goal, there are many GReddy upgrades (intercoolers, blow-off valves, fuel management and boost controllers) to boost the power output even further.

(CARB E.O. # D-397, D-397-3, D-397-7. Contact GReddy Performance Products, Inc. for details)

X-Factor Turbo Kit Stage 1
Just
!
TH_X-Factor_Turbo_Kit_DSeri
This is a full kit,it includes intercooler and fuel management & oiling kit for the turbokit.

Purchasing an X-Factor turbo kit from Xclusive Custom Imports is a great way to get high quality components for your turbo project. All of our turbo kit components are available for purchase individually, but purchasing a kit will allow you to get the components you need at a lower price.
We offer a lot of flexibility in our kits because we know that every project and need is different. If you have a special project that your not quite sure how to do or what you want to get out of it, call us, one of our highly skilled technicians would be happy to go over the pros and cons of the many options you have to choose from. So, choose your options, and enjoy some of the best turbo kits out there at some of the best prices.

Turbo kit includes:

Equal length Stainless Steel tubular manifold
Garrett T3/T4 Turbo
35mm wastegate
50mm BOV (sylvia or RFL style )
Steel down pipe
Steel dump tube flange
All other flanges needed
All gaskets needed
21 x 8 x 3.5 Polished intercooler
Complete Piping kit (polished)
Turbo style pipe connectors and reducers
stainless T-bolt clamps (not cheap hose clamps).
Walbro 255 HF in tank fuel pump
Vortec FMU (fuel management unit)
Steel braided oil feed line with all fittings & connectors
oil return line with all fittings & connectors
"Missing link " map sensor bypass unit.


EDELBROCK Turbo Kits
Only
!
1501
Street legal and easy to install, these kits include everything you need to give your car turbocharged performance. No additional tuning is required when used on otherwise stock engines. The Garrett turbo comes preassembled as one unit with a Ni-resist cast exhaust manifold and elbow, inlet oil and water lines for the simplest possible installation. The Garrett ball bearing turbo spools up fast, works with pump gas and still makes over 60% more power than stock. The Edelbrock exhaust manifold and elbow are designed for maximum flow at high velocity

Turbonitics Turbo Systems
Now Only
!
gt-k_turbo_front

• Patented Ceramic Ball Bearing Turbocharger • W.A.V.E. Technology Air-to-Air Intercooler System • Black-Chrome Coated Piping (when applicable) • High Pressure Silicone Hose and Heavy Duty T-Bolt Clamps • Evolution External Wastegate • Raptor By-Pass/Blow-Off Valve • Exhaust Manifold – High Carbon Cast-Steel (when applicable) • Fuel / Timing Management System • Additional Fuel Injectors • Mandrel-Bent Downpipe with Closed-Loop Wastegate Discharge • Intake System and High Flow Air Filters • All Necessary Hardware, Lines and Fittings • Free Case of Turbonetics TS-1 Synthetic Motor Oil

The wait is over! You were patient and trust me the waiting was worth it. When you mat the gas pedal and feel the boost propel your tC into a whole new level of performance you will be glad you waited for this turbo system. Log on to eTurbochargers.com to find out more and be one of the first people to get your hands on this great system.

AMS SRT-4 Turbo Kits
Now Only
!
srt-4_turbo kit_000

Introducing the AMS GT series Turbo kit for the SRT4

This same kit with an AMS37R made 760 whp and 630 Ft/lbs of torque on only 35 PSI!!!

  • AMS 304 Thick wall SS header with 2 year warranty against cracking
  • AMS Spec GT Series Garrett Turbocharger
  • 3" SS O2 Housing
  • Tial 38mm WG
  • SS Dump Tube
  • 3" Stainless Steel downpipe with 3" 2 bolt flange
  • 4" Aluminum Intake pipe with 4" K&N Intake
  • Oil and water lines
  • 2.5" Lower IC pipe SS
  • All Couplers and hardware
  • All flanges are .5" thick SS to prevent any warping
  • Tig welding all around

    •  

    Fits: Dodge Turbo Neon SRT-4 & Turbo PT Cruiser